25mm Fittings

DB reducing tee 25 x 14

Barbed tee 25mm to 14mm thread

This quality double barbed reducing tee provides high retention in low pressure poly tubing for long-term reliability of connections. The DB range can be confidently installed without clamps. Perfect for use with Coppershield sub surface drip pipe.

PVC Reducing Bush 25 x 20

For use with PVC fittings

Used to connect lengths of PVC pipe.

PVC Valve Adaptor 25mm x 1" M

For use with PVC fittings

For use with PVC fittings

Reducing elbow 25 x 13

Polypropylene elbow designed to reduce 25mm low density poly pipe to 13mm low density poly pipe.

Reducing tee 25 x 13mm

Polypropylene tee designed to reduce 25mm low density poly pipe to 13mm low density poly pipe.

Side outlet elbow 25 x 15 bsp

Polypropylene side outlet elbow designed to connect piping to a 15mm female threaded fitting in a low pressure irrigation system. Used in conjunction with 25mm poly tubing. Perfect for most spray pop up sprinklers and small gear driven rotor sprinklers.

Side outlet elbow 25 x 19 bsp

Perfect for most larger gear-driven rotor sprinklers

Polypropylene side outlet elbow designed to connect piping to a 20mm female threaded fitting in a low pressure irrigation system. Used in conjunction with 25mm low pressure poly tubing. Perfect for most larger gear driven rotor sprinklers.

Side Outlet Tee M 25 x 15 bsp

Polypropylene side outlet tee designed to connect piping to a 15mm female threaded fitting in a low pressure irrigation system. Used with 25mm low pressure poly tubing. Perfect for most spray pop up sprinklers and small gear driven rotor sprinklers.

Threaded Elbow M 25 x 15 bsp

25m barb 15mm male bsp thread

Polypropylene elbow designed to connect piping to a 15mm female threaded fitting in a low pressure irrigation system. Used in conjunction with 25mm low pressure poly tubing. Perfect for most spray pop up sprinklers and small gear driven rotor sprinklers.

Threaded Tee M 25 x 15 bsp

Polypropylene tee designed to connect to 15mm male fittings in-line in a low pressure irrigation system. Used in conjunction with 25mm low pressure poly tubing.

Joiner 25mm

Polypropylene joiner designed to connect piping in a low pressure irrigation system. Used in conjunction with 25mm low pressure poly tubing.

Plain elbow 25mm

Polypropylene elbow designed to divert water through a low pressure irrigation system. Used in conjunction with 25mm low pressure poly tubing.

Plain tee 25mm

Polypropylene tee designed to divert water through a low pressure irrigation system. Used in conjunction with 25mm low pressure poly tubing.

Director 25 x 20 bsp

Polypropylene director designed to connect tubes to valves and female fittings in a low pressure irrigation system. Used in conjunction with 25mm low pressure poly tubing.

Director 25 x 25 bsp

Polypropylene director designed to connect tubes to valves and female fittings in a low pressure irrigation system. Used in conjunction with 25mm low pressure poly tubing. Perfect for connecting 25mm solenoid valves to 25mm poly.

End plug 25mm

Polypropylene end plug designed to terminate water supply in a low pressure irrigation system. Used in conjunction with 25mm low pressure poly tubing.

Greenback Valve 25mm

25mm, barbed in-line tap. On-off device to control the water flow in low pressure irrigation systems. Perfect for use as a flushing tap in a sub-surface irrigation system.

Nut and Tail 25mm

Use these Poly Nut & Tails to connect poly pipe to a male threaded fitting. These fittings are most commonly used to connect poly pipe to a garden tap or a fitting where the pipeline needs to be easy to unscrew if needed.

Ratchet clamp 25mm

19mm ratchet clamp. Ratchet clamps secure polyethylene tube to a wide range of fittings.

Reducing elbow 25 x 19

Polypropylene elbow designed to reduce 25mm low density poly pipe to 19mm low density poly pipe.

Reducing joiner 25 x 13mm

Polypropylene joiner designed to connect 25mm low density poly pipe to 13mm low density poly pipe. Used in conjunction with 13mm and 25mm low pressure poly tubing.

Reducing Joiner 25 x 19mm

Polypropylene joiner designed to connect 25mm low density poly pipe to 19mm low density poly pipe. Used in conjunction with 19mm and 25mm low pressure poly tubing.

Reducing tee 25 x 19mm

Polypropylene tee designed to reduce 25mm low density poly pipe to 19mm low density poly pipe.

Threaded elbow F 25 x 15 bspf

Polypropylene elbow designed to connect to 15mm male fittings in a low pressure irrigation system. Used in conjunction with 13mm low pressure poly tubing. Perfect for connecting an air release valve to your sub-surface irrigation system.